Filter
Top Products
Transmitter default values and ranges (continued)Table D-1:
Type Parameter Default Range Comments
Polarity Active low
Backlight in-
tensity
63 0 – 63
Refresh rate 200 milliseconds 100 – 10,000
milliseconds
Variable 1 Mass flow rate
Variable 2 Mass total
Variable 3 Volume flow rate
Variable 4 Volume total
Variable 5 Density
Variable 6 Temperature
Variable 7 Drive gain
Variable 8–15 None
Display totaliz-
er start/stop
Disabled
Display totaliz-
er reset
Disabled
Display auto
scroll
Disabled
Display offline
menu
Enabled
Display offline
password
Disabled
Display alarm
menu
Enabled
Display ac-
knowledge all
alarms
Enabled
Offline pass-
word
1234
Auto scroll rate 10 sec
Digital com-
munications
Fault action None
Fault timeout 0 seconds 0.0 – 60.0 sec
Modbus address 1
Modbus ASCII support Enabled
Floating-point byte order 3–4–1–2
Default values and ranges
Configuration and Use Manual 239