Filter
Top Products
Configuration and Use Manual 83
Testing and Moving to Production
Operation AppendicesMaintenance and TroubleshootingCommissioning
7.7 Write-protecting the configuration
To prevent unintended changes to the transmitter configuration, you can write-protect the
configuration.
To write-protect the configuration using ProLink II:
1. Click
ProLink > Configuration > Device.
2. Enable write-protection.
To write-protect the configuration using the Communicator:
1. Select
Diag/Service > Perform Diagnostic Action.
2. Select
Enable Write Protect.
To write-protect the configuration using the display:
1. Enter the display menu system.
2. Enter the off-line maintenance menu.
3. Select the Config menu and scroll to
Lock.
4. Enable the Lock option.
Note: To disable write-protection, see Section 3.5.1.