Filter
Top Products
Configuration and Use Manual 139
Operation AppendicesMaintenance and TroubleshootingCommissioning
Appendix E
Using the 375 Field Communicator
E.1 Overview
The 375 Field Communicator is a handheld configuration and management tool for HART-compatible
devices, including Micro Motion transmitters. It provides complete access to transmitter functions and
data.
This appendix provides basic information for connecting the 375 Field Communicator to your
transmitter. The following topics and procedures are discussed:
• Communicator device description – see Section E.2
• Connecting to a transmitter – see Section E.3
• Conventions used in this manual – see Section E.4
• Safety messages and notes – see Section E.5
The instructions in this manual assume that users are already familiar with the Communicator and can
perform the following tasks:
• Turn on the Communicator
• Navigate the Communicator menus
• Establish communication with HART-compatible devices
• Transmit and receive configuration information between the Communicator and HART-
compatible devices
• Use the alpha keys to type information
If you are unable to perform the tasks listed above, consult the Communicator manual before
attempting to use the software. The documentation is available on the Micro Motion web site
(www.micromotion.com).
E.2 Communicator device description
The
2200S Analog device description must be installed on the Communicator.
To view the device descriptions that are installed on your Communicator:
1. At the HART application menu, select
Utility.
2. Select
Available Device Descriptions.
3. Select
Micro Motion.
If you do not see the required device description, download the latest device description file from the
Micro Motion web site, and upgrade your Communicator.