Emerson 2200S Pacemaker User Manual


 
Configuration and Use Manual 1
Before You Begin
Chapter 1
Before You Begin
1.1 Overview
This chapter provides an orientation to the use of this manual. This manual describes the procedures
required to start, configure, use, maintain, and troubleshoot the Model 2200S transmitter.
If you do not know what transmitter you have, see Section 1.4 for instructions on identifying the
transmitter type from the model number on the transmitter’s tag.
1.2 Safety
Safety messages are provided throughout this manual to protect personnel and equipment. Read each
safety message carefully before proceeding to the next step.
1.3 Using this manual
This manual is organized into four sections, as described in Table 1-1.
Table 1-1 Manual organization
Section Chapters Audience Description
Commissioning 2 Person responsible for process design
and device configuration
Person responsible for device testing
and commissioning
“Quick start” tools for device
commissioning
3 through 7 Detailed information for all parameters
that can be configured
Procedures for testing device operation
Procedures for backing up and
write-protecting configuration
Operation 8 Person responsible for operation Procedures for viewing process data
and alarms, and managing totalizers
and inventories
Maintenance and
troubleshooting
9 and 10 Person responsible for periodic
maintenance and troubleshooting
Information and procedures for
flowmeter zero, meter proving,
calibration, and troubleshooting.
Appendices All All Reference information