Filter
Top Products
124 Micro Motion
®
Model 2200S Transmitters
Default Values and Ranges
Density Density damping 1.28 sec 0.0 – 60.0 sec User-entered value is
corrected to nearest value in
list of preset values.
Density units g/cm
3
Density cutoff 0.2 g/cm
3
0.0 – 0.5 g/cm
3
D1 0.00000
D2 1.00000
K1 1000.00
K2 50,000.00
FD 0.00000
Temp Coefficient 4.44
Slug flow Slug flow low limit 0.0 g/cm
3
0.0 – 10.0 g/cm
3
Slug flow high limit 5.0 g/cm
3
0.0 – 10.0 g/cm
3
Slug duration 0.0 sec 0.0 – 60.0 sec
Temperature Temperature damping 4.8 sec 0.0 – 80.0 sec User-entered value is
corrected to nearest lower
value in list of preset values.
Temperature units Deg C
Temperature calibration factor 1.00000T0.0000
T-Series sensor D3 0.00000
D4 0.00000
K3 0.00000
K4 0.00000
FTG 0.00000
FFQ 0.00000
DTG 0.00000
DFQ1 0.00000
DFQ2 0.00000
Special units Base mass unit g
Base mass time sec
Mass flow conversion factor 1.00000
Base volume unit L
Base volume time sec
Volume flow conversion factor 1.00000
Base GSV time min
Base GSV unit SCF
GSV conversion factor 1.00000
Variable
mapping
Primary variable Mass flow
Secondary variable Density
Tertiary variable Mass flow
Quaternary variable Volume flow
Table A-1 Transmitter default values and ranges continued
Type Setting Default Range Comments