Filter
Top Products
138 Micro Motion
®
Model 2200S Transmitters
Connecting with ProLink II Software
7. If an error message appears:
a. You may be using incorrect connection parameters.
- Ensure you are using the correct COM port.
- If you are unsure of the transmitter’s address, use the
Poll button in the Connect
window to return a list of all devices on the network.
b. Check all the wiring between the PC and the transmitter.
c. Increase or decrease resistance.
Note: For more troubleshooting information, see Section 10.14.3.
D.5 ProLink II language
ProLink II can be configured for the following languages:
• English
•French
• Spanish
•German
Note: Other languages may be available, depending on the version of ProLink II.
To configure the ProLink II language, use the Tools menu. See Figure 2-2.
In this manual, English is used as the ProLink II language.