NCT Group 99M Microscope & Magnifier User Manual


 
20 Custom Macro
181
The bits have the following meanings:
0 = no mirror imaging
1 = mirror imaging on.
If, e.g., the value of the variable is 5, mirror image is on in axes 1 and 3. The axis number refers to a
physical axis, the parameter defining the particular name of axis pertaining to a physical axis number.
Number of machined parts, number of parts to be machined - #3901, #3902
The numbers of machined parts are collected in counter #3901 by the control. The contents of the
counter will be incremented by 1 upon the execution of each function M02, M30 or selected M
functions in parameter PRTCNTM. As soon as the number of machined parts becomes equal to the
required number of parts (counter #3902), the NC tells it the PLC on a flag.
Number of machined parts #3901
Number of parts to be machined #3902
Counters #3901 and #3902 are located on parameters PRTTOTAL and PRTREQRD, respectively.
Modal information - #4001 through #4130, #4201 through #4330
The modal values effective in the previous block can be established by reading system variables #4001
through #4130.
The modal commands effective in the block under execution can be established by reading variables
#4201 through 4330.
system
variable
#4001
:
#4020
#4101
#4102
#4103
#4107
#4108
#4109
#4111
#4113
#4114
#4115
#4119
#4120
modal information of
the previous block
G code, group 1
:
G code, group 20
code A
code B
code C
code D
code E
code F
code H
code M entered first
block number, N
program number, O
code S
code T
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
system
variable
#4201
:
#4220
#4301
#4302
#4303
#4307
#4308
#4309
#4311
#4313
#4314
#4315
#4319
#4320
modal information of
the block being
executed
G code, group 1
:
G code, group 20
code A
code B
code C
code D
code E
code F
code H
code M entered first
block number, N
program number, O
code S
code T