![](http://pdfasset.owneriq.net/d/e4/de4d7af4-f03c-463a-8759-8803ed7a3d5e/de4d7af4-f03c-463a-8759-8803ed7a3d5e-bg71.png)
14 The Tool Compensation
113
Instruction G42 functions in the same manner as G41 with the difference that the compensation
vector is computed in a direction opposite to G41:
A change-over from state G41 to G42 or vice versa is only feasible in a linear interpolation block.
The previous values will be modal if - with the three-dimensional tool compensation set up - I and J
and K are all omitted in an interpolation.
It is not feasible to set up the three-dimensional compensation and two-dimensional radius
compensation simultaneously.