Filter
Top Products
20 Custom Macro
176
Interface output signals - #1100–#1115, #1132
16 interface output signals can be issued, one by one, by assigning values to variables #1100
through #1115.
Name of system variables Interface input with reference to the
PLC program
#1100 Y[CONST+000]
#1101 Y[CONST+001]
#1102 Y[CONST+002]
#1103 Y[CONST+003]
#1104 Y[CONST+004]
#1105 Y[CONST+005]
#1106 Y[CONST+006]
#1107 Y[CONST+007]
#1108 Y[CONST+010]
#1109 Y[CONST+011]
#1110 Y[CONST+012]
#1111 Y[CONST+013]
#1112 Y[CONST+014]
#1113 Y[CONST+015]
#1114 Y[CONST+016]
#1115 Y[CONST+017]
where CONST=O_LINE*10 and O_LINE is a parameter. Thus, any arbitrary interface output
word can be issued or read.
The values of the above variables may be
0= the contact at the output is open,
1= the contact at the output is closed.
The above 16 outputs can be issued simultaneously by using variable #1132. Depending on the
system variables assigned to the single outputs, the output value will be
Accordingly, with outputs #1102 and #1109 are on, the rest of outputs being off, variable #1132
must output the value