Filter
Top Products
1-12 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide
Performing Basic Configuration
Where to go next
In the following example, commands enforce address security and specify a trusted address for
read and write access:
admin> read snmp
SNMP read
admin> list
enabled = no
read-community = public
read-write-community = write
enforce-address-security = no
read-access-hosts = [ 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 ]
write-access-hosts = [ 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 ]
contact = ""
location = ""
admin>
set enforce-address-security = yes
admin> set read-access 1 = 10.2.3.4
admin> set write-access 2 = 10.2.56.123
admin> write
SNMP written
Where to go next
For APX 8000 units with two shelf controllers, proceed to Chapter 2 to configure
shelf-controller redundancy. Then proceed to the appropriate chapters to configure slot cards
for your unit.
For APX 8000 units with a single shelf controller and for MAX TNT and DSLTNT units,
proceed to the appropriate chapters to configure slot cards for your unit.