Filter
Top Products
Configuring DSL Connections (DSLTNT)
Configuring data transfer rates
APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Preliminary May 9, 2000 17-11
LOG info, Shelf 1, Controller, Time: 16:47:11--
[1/7/1/1] Incoming Call [MBID 18]
LOG info, Shelf 1, Controller, Time: 16:47:11--
[1/7/1/0] Assigned to port [MBID 18]
LOG info, Shelf 1, Controller, Time: 16:47:11--
[1/7/1/1] Call Connected [MBID 18]
LOG info, Shelf 1, Slot 7, Time: 16:47:14--
[1/7/1/0] LAN session up: <adslpipe-1> [MBID 18]
[adslpipe-1]
LOG notice, Shelf 1, Slot 7, Time: 16:47:14--
Line 1 (radius) profile adslpipe-1
from <autobaud,1088000,2560000>
to <autobaud,952000,7168000>
LOG notice, Shelf 1, Slot 7, Time: 16:47:14--
Line 1 (radius) profile adslpipe-1 operation rates
<autobaud,1088000,2560000>
The DSLTNT then terminates the call and re-establishes it using the configured data rates:
LOG notice, Shelf 1, Slot 7, Time: 16:47:14--
Reconfigure Line 1 (radius) profile adslpipe-1 .....
LOG notice, Shelf 1, Slot 7, Time: 16:47:14--
Line 1 OOS
LOG warning, Shelf 1, Controller, Time: 16:47:14--
[1/7/1/1] Call Disconnected [MBID 18]
LOG info, Shelf 1, Controller, Time: 16:47:14--
[1/7/1/0] Call Terminated [MBID 18]
LOG notice, Shelf 1, Slot 7, Time: 16:47:14--
Line 1 INS
LOG info, Shelf 1, Slot 7, Time: 16:47:14--
[1/7/1/0] LAN session down: <adslpipe-1> [MBID 18]
[adslpipe-1]
LOG warning, Shelf 1, Slot 7, Time: 16:47:14--
[1/7/1/0] STOP: ’adslpipe-1’; cause 185.; progress 60.;
host 200.200.200.1 [MBID 18] [adslpipe-1]
LOG notice, Shelf 1, Slot 7, Time: 16:47:30--
Line 1 up
LOG info, Shelf 1, Controller, Time: 16:47:34--
[1/7/1/1] Incoming Call [MBID 19]