Filter
Top Products
Documentation set
APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide xix
Documentation set
The APX 8000/MAX TNT/DSLTNT documentation set consists of the following manuals.
• Read me first:
– Access Networks Safety and Compliance Guide
Contains important safety instructions and country-specific compliance information
that you must read before installing a TAOS unit.
– TAOS Command-Line Interface Guide
Introduces the TAOS command-line environment and shows how to use the
command-line interface effectively. This manual describes keyboard shortcuts and
introduces commands, security levels, profile structure, and parameter types.
• Installation and basic configuration:
– APX 8000 Hardware Installation Guide
Shows how to install APX 8000 hardware and includes APX 8000 technical
specifications.
– MAX TNT/DSLTNT Hardware Installation Guide
Shows how to install MAX TNT and DSLTNT hardware and includes technical
specifications for these units.
– APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide (this guide)
Shows how to configure the cards installed in a TAOS unit and their line attributes for
such functions as framing, signaling, and channel usage. It also describes how calls
are routed through the system and includes information about configuring the unit in a
Signaling System 7 (SS7) environment. This guide explains shelf controller
redundancy for an APX 8000 unit.
• Configuration:
– APX 8000/MAX TNT/DSLTNT ATM Configuration Guide
Describes how to configure Asynchronous Transfer Mode (ATM) operations on a
TAOS unit. This guide explains how to configure physical layer attributes and how to
create permanent virtual circuit (PVC) and switched virtual circuit (SVC) ATM
interfaces. It includes information about ATM direct and ATM-Frame Relay circuits.
– APX 8000/MAX TNT/DSLTNT Frame Relay Configuration Guide
Describes how to configure Frame Relay operations on a TAOS unit. This guide
explains physical layer configuration and restrictions and how to create permanent
virtual circuit (PVC) and switched virtual circuit (SVC) interfaces. It includes
information about Multilink Frame Relay (MFR) and link management, as well as
Frame Relay and Frame Relay direct circuits.
– APX 8000/MAX TNT/DSLTNT WAN, Routing, and Tunneling Configuration Guide
Shows how to configure LAN and WAN routing for analog and digital dial-in
connections on a TAOS unit. This guide includes information about IP routing, Open
Shortest Path First (OSPF) routing, Internet Group Management Protocol (IGMP)
routing, multiprotocol routers, Virtual Routers (VRouters), and tunneling protocols.
– MultiVoice™ for MAX TNT Configuration Guide
Shows how to configure the MultiVoice application to run on a MAX TNT unit in
both Signaling System 7 (SS7) and H.323 Voice over IP (VoIP) configurations.