Filter
Top Products
Configuring DSL Connections (DSLTNT)
Configuring IDSL voice connections
APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Preliminary May 9, 2000 17-21
techpubs-lab-25> list line-interface channel-config
[in T1/{ shelf-1 slot-1 1 }:line-interface:channel-config]
channel-config[1] = { switched-channel 9 "" { any-shelf any-slot +
channel-config[2] = { switched-channel 9 "" { any-shelf any-slot +
channel-config[3] = { switched-channel 9 "" { any-shelf any-slot +
channel-config[4] = { switched-channel 9 "" { any-shelf any-slot +
channel-config[5] = { switched-channel 9 "" { any-shelf any-slot +
..
..
6 Assign each T1 channel to a trunk group. For example:
admin> set 1 trunk = 5
admin> set 2 trunk = 5
admin> set 3 trunk = 5
admin> set 4 trunk = 5
admin> set 5 trunk = 5
admin> set 6 trunk = 5
admin> set 7 trunk = 5
admin> set 8 trunk = 5
admin> set 9 trunk = 5
admin> set 10 trunk = 5
..
..
This trunk group number must be prepended to the number dialed by users dialing out
from the Pipeline.
7 Write the T1 profile:
admin> write
T1/{ shelf-1 slot-1 1 } written
Configuring the Pipeline
When configuring a remote ISDN device to attach to the IDSL line card, always select ATT
5ESS Point-to-Point as the switch type. The IDSL line card can only emulate the ATT 5ESS
Point-to-Point switch. (If you are connecting using a Pipeline, you can specify an IDSL switch
type. This selection emulates an ATT 5ESS Point-to-Point switch with en-bloc dialing support,
which is required for IDSL voice calls.)
Before you configure the Pipeline, make sure the PC connected to the Pipeline has an IP
address on the same subnet as the Pipeline, and that the IP address of the Pipeline is configured
as the default gateway for the PC.
Configuring the Configure profile
The Pipeline Configure profile allows you to set up the basic parameters for a connection. To
configure the Pipeline Configure profile:
1 From the Main Edit menu, select Configure.
2 Specify the following values:
– Switch Type=IDSL
– Chan Usage=Switch/Switch
– My Num A=55105554444