Filter
Top Products
APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Index-11
usage, 7-4, 7-18
T1 line
continuity check, two-wire
, 18-11
T1 lines
assigning name to profile
, 7-7
call control for
, 7-11
call control for line-side
, 7-11
call control for trunk-side
, 7-11
clock source and priority
, 7-4, 7-17
clocking for
, 7-17
configuration
, 18-8
configuration parameters
, 7-6
configuring channelized
, 7-11
configuring NFAS signaling for
, 7-13
CSU or DSX
, 7-17
data sense (PRI)
, 7-22
default call route created by system
, 11-3
enabling
, 7-8
encoding
, 7-8
example configurations
, 7-23
ISDN NFAS, 7-13
PRI, 7-8
FrameLine cards and
, 8-1, 10-1
framing
, 7-8
how system chooses a clock source
, 7-17
idle-mode
, 7-5, 7-22
inband signaling
, 7-11
inverting data
, 7-22
line-side vs. trunk-side
, 7-2
overview
, 7-2
overview of configuration
, 7-3
provisioning switch for
, A-1
R1 and R1-modified signaling, configuring
, 7-15
robbed-bit call control
, 7-11
signaling system 7 (SS7) data trunks
, 18-8
SNMP support for
, 11-1
specifying channel usage
, 7-18
specifying D channel for PRI signaling
, 7-8
specifying idle pattern
, 7-22
specifying signaling
, 7-8
specifying switch type for ISDN PRI service
, 7-8
switch type
, 7-8
T3 card and
, 11-1
two-wire continuity check
, 18-11
type of transceiver
, 7-4, 7-17
unchannelized
, 7-2
T1 network
signaling gateway, signaling system 7 (SS7)
, 18-4
T1 profile
, 7-7
assigning a name to
, 7-7
continuity checks
, 18-12
created by system
, 4-2, 7-6, 12-3
created for T1 card
, 7-6
example configurations
ISDN NFAS, 7-13
nailed, 7-21
nailed channels, 7-21
phone number assignments, 7-19
PRI, 7-8
trunk group assignments, 7-20
inband signaling
, 7-11
parameters in
, 7-6
profiles not used by FrameLine card
, 8-2
T2
outgoing continuity test
, 18-13
T3 card
Call-Route profile and
, 11-3
clocking
, 11-5
configuration requirements
, 11-2
configuring physical link
, 11-5
enabling line
, 11-5
FDL supported
, 11-3
NFAS
, 11-2
overview
, 11-1
overview of configuration
, 11-1
profiles created on start up
, 11-3
SNMP management of
, 11-1
T1 lines and
, 11-1
T1 parameters ignored
, 11-3
T1 profiles
, 11-4
T3 network
signaling gateway, signaling system 7 (SS7)
, 18-4
T3 profile
assigning a name to
, 11-4
described
, 11-3
T5 timer
signaling system 7 (SS7)
, 18-11
TAOS
, 18-4
continuity testing, supports
, 18-13
TCP/IP
signaling gateway
, 18-4
TDM. See time-division multiplexing (TDM)
Telnet, assigning password for access
, 1-8
termination
calls
, 18-21
testing
continuity
, 18-4
TFTP, server requirement for DSL Plug and Play
, 17-14
Thermal alarms
, 3-3
Thermal profile
, 3-1
overview for fan tray operations
, 3-1
Thermal alarms
, 3-3
Thermal profile, configuring for fan tray operations
, 3-1
Thermal status command
, 3-5
Thermal status reporting
fan tray
, 3-4
time and date, setting
, 1-5
tone-type and tone-sting
millwatt tones, analog
, 18-13
traffic shaper, settings
, 14-3, 15-3