Filter
Top Products
Index-8 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide
TAOS default value, 18-6
Use-System-IP-Address-As-Source
, 18-7
passwords
assigning to serial port
, 1-8
changing Admin
, 1-8
not saved by default
, 1-8
SNMP community strings
, 1-11
Telnet
, 1-8
permissions, Allow-Password not enabled by default
,
1-8
phone numbers
add-on numbers described
, 7-19
assigning to T1 channels
, 7-19
example E1 profile configuration
, 9-14
example T1 profile configuration
, 7-19
hunt groups described
, 7-19
used to route calls
, 19-12
Physical interface profiles
configuration, setting up shelf-controller redundancy
,
2-6
shelf-controller
, 2-6
physical-address parameter, OC3-ATM port
, 15-2
Ping, using to verify system configuration
, 1-7
Pipeline, sample IDSL configuration
, 17-21, 17-25
Plug and Play
BOOTP Relay configuration
, 17-15
default DSLPipe configuration
, 17-14
DHCP server requirements
, 17-13
DSL connections and
, 17-12
MAX TNT configuration for
, 17-15
overview
, 17-12
TFTP server requirements
, 17-14
ports, enabling only active DSL
, 17-4
PPP calls
E1 FrameLine card
, 10-2
FrameLine card and
, 8-1
on SDSL
, 17-3
PRI
NFAS group, single
, 7-13
NFAS groups, multiple
, 7-13
overlap receiving, configuring
, 9-13
overview
, 7-2, 9-2
provisioning for E1
, A-2
provisioning for T1
, A-2
specifying signaling for T1 lines
, 7-8
primary controller
switching
, 2-8
viewing up time
, 2-9
profiles
assigning name to E1
, 9-6
assigning name to serial WAN
, 12-4
assigning name to T1
, 7-7
assigning name to T3
, 11-4
assigning name to UDS3
, 13-2
Call-Info
, 18-20
configuring ADSL
, 17-27
configuring Frame Relay for ADSL
, 17-24
configuring Frame Relay for SDSL
, 17-32, 17-36
configuring SDSL
, 17-32, 17-36
Connection profile for ADSL
, 17-27
Connection profile for SDSL
, 17-30, 17-34
E1
, 18-10
Ethernet described
, 4-2
IP-Interface described
, 4-3
listing contents using the List command
, 7-6
making the profile the working one
, 7-6, 9-5, 12-3
overview of Ethernet
, 4-2
reading and writing
, 7-6
Redundancy
, 2-1
saving changes using the Write command
, 7-6
SNMP
, 1-11
STM-0
, 16-2
T1 for T3 card
, 11-4
T1 profiles for T3 card
, 11-4
T3
, 11-3
Thernal, for fan tray operations
, 3-1
UDS3
, 13-2
protocol support
signaling system 7 (SS7)
, 18-1
provisioning
E1 PRI
, A-2
T1 line
, A-1
T1 PRI
, A-2
PSTN. See Public Switched Telephone Network (PSTN
PVCs
supported on E1 FrameLine card
, 10-2
supported on T1 FrameLine card
, 8-2
R
R1 signaling
ANI and
, 7-15
configuring
, 7-15, 9-10
R1-modified signaling, configuring
, 7-15
R2 signaling
additional settings
, 9-11
Caller-ID and
, 9-11
configuring
, 9-10
example
, 9-11
RADIUS, FrameLine card and
, 8-2, 10-2
RADSL, optimization of data transfer rates
, 17-2
RAS. See remote access server (RAS)
redundancy
DS3-ATM card
, 14-3
redundancy operations, overview
, 2-1
Redundancy profile
configuration, setting up shelf-controller redundancy
,
2-6