Lucent Technologies 7820-0802-003 Wheelchair User Manual


 
APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Index-1
Index
A
ACM. See address complete message (ACM)
activation, for serial WAN card
, 12-3
add-on numbers
described
, 7-19
specifying
, 7-19
addresses
requiring call to accept dynamic
, 1-9
used to route calls received on channel
, 19-13
used to route calls to a device
, 19-13
Admin password, changing
, 1-8
ADSL card
configuring Connection profile for
, 17-27
configuring DSLPipe for
, 17-28
configuring Frame Relay profile for
, 17-24
data transfer, configuring rates
, 17-6
nailed group used for connection
, 17-27
overview
, 17-2
See also DSL
ADSL profile, configuring
, 17-27
ADSL-CAP card
line speeds supported
, 17-2
ADSL-DMT card
line speeds supported
, 17-2
AMI encoding, described
, 7-8
analog encoding, specifying for codec
, 7-22, 9-16
Ascend_Global_Call_Id
Start and Stop records
, 18-21
ASGCP. See Access SS7 Gateway Control Protocol
(ASGCP)
AT strings, configuring additional
, 5-3
attributes
Ascend_Global_Call_Id
, 18-21
authorization, SNMP access to System
, 1-10
Automatic Number Identification, R1 signaling and
,
7-15
B
B8ZS encoding, described, 7-8
back-to-back
configuring E1 connection
, 9-7
configuring T1
, 7-21
BOOTP Relay, MAX TNT configuration for
, 17-15
C
call control, for T1 lines, 7-11
call ID
IPDC generation
, 18-20
remote access server (RAS)
call routing
algorithm
, 19-11
assigning destination to E1 channels
, 9-16
by call type
, 19-13
by phone numbers
, 19-12
by subaddress
, 19-12
by the calls source channel address
, 19-13
by trunk group number
, 19-12
FrameLine card and
, 8-1, 10-1
serial WAN card and
, 12-2
T3 card
, 11-3
Caller-ID, R2 signaling and
, 9-11
Call-Info profile
, 18-20
Call-Route profile
created by the system for E1 lines
, 9-16
created by the system for T1 lines
, 11-3
Series56 II and
, 5-4
T3 card and
, 11-3
calls
clearing
, 18-19
configuring trunk groups
, 7-20
how multichannel calls are dialed
, 7-19
incoming IDSL voice
, 17-18
multichannel
, 7-11, 7-19
outbound
, 7-20, 9-14
outgoing IDSL voice
, 17-18
overlap receiving on PRI
, 9-13
statistics
, 18-19
types supported on SDSL
, 17-3
virtual calls for DSL
, 17-4
CAS