Filter
Top Products
APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Index-5
Ethernet
configuring full duplex mode on Ethernet-2 card
, 4-3
installing Ethernet-2 card
, 4-2
overview of Ethernet card configuration
, 4-2
related profiles
, 4-2
shelf controller and routing load
, 1-4
shelf controller interface for management
, 4-2
specifying default gateway for system
, 1-6
specifying DNS information
, 1-6
specifying IP address of system
, 1-4
verifying configuration of system with Ping
, 1-7
Ethernet cards, overview of
, 4-1
Ethernet IP address
assigning
, 2-4
Ethernet profiles
described
, 4-2
overview of
, 4-2
F
fan tray
Thermal status reporting
, 3-4
fan tray operations
overview of Thernal profile
, 3-1
fanstatus command
, 3-4
fatal-error history log, clearing
, 2-11
fault tolerance
defining soft IP interface
, 2-5
FDL, supported on T3 card
, 11-3
flag pattern, described
, 7-22
Frame Relay
configuring profile for ADSL
, 17-24
configuring profile for SDSL
, 17-32, 17-36
E1 FrameLine card and
, 10-2
FrameLine card and
, 8-2
how it uses the serial WAN line
, 12-4
number of DLCIs supported on E1 FrameLine card
,
10-2
number of DLCIs supported on FrameLine card
, 8-2
on SDSL
, 17-3
PVCs supported on E1 FrameLine card
, 10-2
PVCs supported on T1 FrameLine card
, 8-2
sample configuration with system-based routing
,
17-34
sample IDSL configuration
, 17-22
sample SDSL configuration with numbered
interfaces
, 17-29
serial WAN card support for
, 12-2
Series56 II card and
, 5-5
specifying nailed group for SDSL
, 17-16, 17-32,
17-36
FrameLine card
Call-Route profiles and
, 8-1, 10-1
clocking and
, 8-3, 10-6
Frame Relay and
, 8-2
MP/MP+ calls and
, 8-2, 10-2
nailed groups and
, 8-2
nailed links and
, 8-2
overview
, 8-1
overview of
, 8-2
PPP support
, 8-1
RADIUS and
, 8-2, 10-2
routing protocols supported
, 8-2
SCA and
, 8-1, 10-1
SNMP and
, 8-2
STAC compression not supported
, 8-2, 10-2
T1 profiles not used by
, 8-2
framing
for ISDN
, 7-8
on E1 lines
, 9-7
on T1 lines
, 7-8
framing formats, DS3
, 14-2
Front-end type for E1 lines
, 9-4, 9-13
Front-end type for T1 lines
, 7-4, 7-17
Full-duplex 10/100Base-T card, described
, 4-1
full-duplex, configuring on Ethernet-2 card
, 4-3
G
G703 framing, describing, 9-7
gateway
configuring for IDSL connection
, 17-25
signaling
, 18-4
specifying default
, 1-6
Global-Call-ID parameter
, 18-20
group
channels in nailed
, 7-21, 9-15
nailed for SDSL
, 17-16, 17-32, 17-36
specifying nailed for serial WAN
, 12-4
H
handshaking, disrupted by forwarded dialed digits, 7-11
HDLC
described
, 5-5
nailed channels and
, 5-5
HDLC cards
Series56 II cards and Frame Relay connections
, 5-5
HDLC frames, FrameLine card and
, 8-1, 10-1
hunt groups, described
, 7-19
Hybrid Access
how the MAX TNT uses it
, 5-5
Hybrid Access card, described
, 5-5