Filter
Top Products
3 - 58
3.4 Buffer Memory
3.4.24 Mode switching setting (Un\G158, Un\G159)
3
SPECIFICATIONS
3.4.24 Mode switching setting (Un\G158, Un\G159)
This area is used to switch the mode between normal mode and offset/gain setting mode.
This mode can be switched without resetting the programmable controller CPU.
Setting methods
(a) Set the setting value of the switching target mode.
(b) To switch the mode, turning on Operating condition setting request (Y9) after
setting the value is required.
(c) When the mode is switched completely, this area for Un\G158 and Un\G159 is
cleared to “0”.
POINT
If a value other than the setting values in Table 3.17 is written, mode switching is
not performed.
Table 3.17 Switching target mode and setting value
Switching target mode
Setting value
Un\G158 Un\G159
Normal mode 0964H 4144H
Offset/gain setting value mode 4144H 0964H