Filter
Top Products
6 - 27
6.3 Using Programs on Remote I/O Network
6.3.3 Program example when GX Configurator-TI is not used
6
PROGRAMMING
Figure 6.28 Program example when GX Developer-TI is not used in remote I/O network use (Continued)
Reads measured
temperature values
of CH1 to CH3.
Resets Disconnection
detection flag (X100C).
Resets Error flag
(X100F).
Processing at CH1
disconnection detection
Processing when CH2
process alarm has occurred
Processing when CH3
rate alarm has occurred