Filter
Top Products
2
SYSTEM CONFIGURATION
2.1 Applicable Systems
2 - 2
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SETUP AND
PROCEDURES BEFORE
OPERATION
5
UTILITY PACKAGE (GX
CONFIGURATOR-TI)
6
PROGRAMMING
7
ONLINE MODULE
CHANGE
8
TROUBLESHOOTING
:Applicable, :N/A
* 1 Limited within the range of I/O points for the CPU module.
* 2 Restrictions apply to mountable slot position. (Refer to (2) in this section)
* 3 An extension base unit cannot be connected to a safety CPU.
Remark
To use the Q68TD-G-H02 (H01) with a C Controller module, refer to the user's
manual for the C Controller module.
(b) Mounting to a MELSECNET/H remote I/O station
The table below shows the network modules and base units applicable to the
Q68TD-G-H02 (H01) and quantities for each network module model.
Depending on the combination with other modules or the number of mounted
modules, power supply capacity may be insufficient.
Pay attention to the power supply capacity before mounting modules, and if the
power supply capacity is insufficient, change the combination of the modules.
Table 2.1 Applicable modules, number of mountable modules, and applicable base units
Applicable CPU module
No. of modules
*1
Applicable base unit
*2
CPU type CPU model Main base unit Extension base unit
Programmable
controller CPU
Basic model QCPU
Q00JCPU Up to 16
Q00CPU
Up to 24
Q01CPU
High Performance
model QCPU
Q02CPU
Up to 64
Q02HCPU
Q06HCPU
Q12HCPU
Q25HCPU
Process CPU
Q02PHCPU
Up to 64
Q06PHCPU
Q12PHCPU
Q25PHCPU
Redundant CPU
Q12PRHCPU
Up to 53
Q25PRHCPU
Universal model QCPU
Q00UJCPU Up to 16
Q00UCPU
Up to 24
Q01UCPU
Q02UCPU Up to 36
Q03UDCPU
Up to 64
Q04UDHCPU
Q06UDHCPU
Q10UDHCPU
Q13UDHCPU
Q20UDHCPU
Q26UDHCPU
Q03UDECPU
Q04UDEHCPU
Q06UDEHCPU
Q10UDHCPU
Q13UDEHCPU
Q20UDEHCPU
Q26UDEHCPU
Q50UDEHCPU
Q100UDEHCPU
Safety CPU QS001CPU N/A
*3
C Controller module
Q06CCPU-V
Up to 64
Q06CCPU-V-B
Q12DCCPU-V