Filter
Top Products
5 - 23
5.6 Monitoring/Test
5.6.2 Offset/gain setting operation
5
UTILITY PACKAGE (GX Configurator-TI)
(b) Error handling
Confirm that the ERR. LED for the Q68TD-G-H02(H01) is off. If the ERR. LED is
lit, click on , check the error code on the monitor screen, and then
perform the offset/gain settings again.
(7) Switch to the normal mode
Set "Normal mode" in the Setting value field of Mode Switching Setting and click the
button to perform write.
On completion of write, the indication in the Current value field of Mode Switching
Setting Status changes to "Normal mode".