Filter
Top Products
5
UTILITY PACKAGE (GX Configurator-TI)
5.6 Monitoring/Test
5.6.1 Monitor/test screen
5 - 18
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SETUP AND
PROCEDURES BEFORE
OPERATION
5
UTILITY PACKAGE (GX
CONFIGURATOR-TI)
6
PROGRAMMING
7
ONLINE MODULE
CHANGE
8
TROUBLESHOOTING
5.6 Monitoring/Test
5.6.1 Monitor/test screen
[Purpose]
Start buffer memory monitoring/testing, I/O signal monitoring/testing, offset/gain
settings (refer to Section 5.6.2) and pass data (refer to Section 5.6.3) from this screen.
[Operating procedure]
Monitor/test module selection screen "Start I/O No.
*1
" "Module type" "Module
model name"
* 1 Enter the start I/O numbers in hexadecimal.
The screen can also be started from System monitor of GX Developer Version 6 or
later.
Refer to the GX Developer Operating Manual for details.
[Setting screen]
Figure 5.11 Monitor/test screen
Monitor/Test
CH
Offset/
Gain Setting
CH
1)