Filter
Top Products
3 - 46
3.4 Buffer Memory
3.4.13 Warning output enable/disable setting (Un\G46)
3
SPECIFICATIONS
3.4.13 Warning output enable/disable setting (Un\G46)
Enable/disable state of warning output for process alarm or rate alarm is set for each
channel.
(1) Setting methods
(a) Warning output enable/disable setting is set for the corresponding channels in the
following figure.
Figure 3.30 Setting of Warning output enable/disable setting (Un\G46)
(b) Turn on Operating condition setting request (Y9) to activate the setting.
(2) Default value
Both process alarm and rate alarm are set to “Disable” for all channels (FFFFH).
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
CH4 CH3 CH2 CH1CH8 CH7 CH6 CH5CH4 CH3 CH2 CH1CH8 CH7 CH6 CH5
Rate alaram setting
Process alarm setting
0: Enable,
1: Disable