Filter
Top Products
5
UTILITY PACKAGE (GX Configurator-TI)
5.2 Installing and Uninstalling the Utility Package
5.2.1 Handling precautions
5 - 4
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SETUP AND
PROCEDURES BEFORE
OPERATION
5
UTILITY PACKAGE (GX
CONFIGURATOR-TI)
6
PROGRAMMING
7
ONLINE MODULE
CHANGE
8
TROUBLESHOOTING
(5) Switching between two or more Intelligent function module utilities
When two or more Intelligent function module utility screens cannot be displayed side
by side, select a screen to be displayed on the top of others using the task bar.
Figure 5.1 Display example of task bar
(6) Number of parameters that can be set in GX Configurator-TI
When multiple intelligent function modules are mounted, the number of parameter
settings must not exceed the following limit.
For example, if multiple intelligent function modules are installed to the MELSECNET/
H remote I/O station, configure the settings in GX Configurator-TI so that the number
of parameter settings for all the intelligent function modules does not exceed the limit
of the MELSECNET/H remote I/O station. Calculate the total number of parameter
settings separately for the initial setting and for the auto refresh setting.
The number of parameters that can be set for one module in GX Configurator-TI is as
shown below.
Example) Counting the number of parameter settings in Auto refresh setting
Figure 5.2 Parameter setting screen for Auto refresh setting
Table 5.2 Maximum number of parameters that can be set in GX Configurator
When intelligent function modules
are installed to:
Maximum number of parameter settings
Initial setting Auto refresh setting
Q00J/Q00/Q01CPU 512 256
Q02/Q02H/Q06H/Q12H/Q25HCPU 512 256
Q02PH/Q06PH/Q12PH/Q25PHCPU 512 256
Q12PRH/Q25PRHCPU 512 256
Q00UJ/Q00U/Q01UCPU 512 256
Q02UCPU 2048 1024
Q03UD/Q04UDH/Q06UDH/
Q10UDH/Q13UDH/Q20UDH/
Q26UDH/Q03UDE/Q04UDEH/
Q06UDEH/Q10UDEH/Q13UDEH/
Q20UDEH/Q26UDEHCPU
4096 2048
Q50UDEH/Q100UDEHCPU Not available Not available
MELSECNET/H remote I/O station 512 256
Table 5.3 Number of parameter settings that can be set for one module
Target module Initial setting Auto refresh setting
Q68TD-G-H02(H01) 6 (Fixed) 24 (Max.)
This one row is counted as one setting.
Blank rows are not counted.
Count up all the setting items on this
screen, and add the total to the number
of settings for other intelligent function
modules to get a grand total.