Filter
Top Products
APPENDICES
Appendix 2 Dedicated Instruction
Appendix 2.1 Dedicated Instruction List and Available Device
APPX - 2
APPENDICESINDEX
Appendix 2 Dedicated Instruction
Appendix 2.1 Dedicated Instruction List and Available Device
(1) Dedicated instruction list
The following table lists the dedicated instructions that can be used with the Q68TD-
G-H02(H01) converter modules.
POINT
When the module is mounted to a MELSECNET/H remote station, the dedicated
instructions cannot be used.
(2) Available devices
The following devices are available for the dedicated instructions:
* 1 Word device bit designation can be used as bit data.
Word device bit designation is done by designating , .
(Designation of bit numbers is done in hexadecimal.)
For example, bit 10 of D0 is designated as .
However, there can be no bit designation for timers (T), retentive timers (ST) and counters (C).
Table APPX.3 Dedicated instruction list
Instruction Description
Reference
section
G(P).OFFGAN
Switches to the offset/gain setting mode.
Switches to the normal mode.
Appendix 2.2
G(P).OGLOAD
Reads the offset/gain values of the user range setting to
the CPU.
Appendix 2.3
G(P).OGSTOR
Restores the offset/gain values of the user range setting
stored in the CPU to the Q68TD-G-H02(H01) converter
module.
Appendix 2.4
Table APPX.4 Available devices
Internal devices
File register Constant
Bit
*1
Word
X, Y, M, L, F, V, B T, ST, C, D, W R, ZR -
Word device Bit No.
D0.A