BMC Software, Inc., Confidential and Proprietary Information
7-16 PATROL
®
Database Administration Installation Guide
When the installation is complete, an Information box displays,
indicating that you should notify all client users that they should perform
a workstation installation using
workstation.exe to access the products
you installed. Refer to “Installing to a Workstation that is Connected to a
Network,” for details.
Step 12 Click OK to complete the installation.
Installing to a Workstation that is Connected to a Network
This procedure installs client files from a host on the network to a
workstation. The product actually runs from the network drive.
Note
You must first perform a client installation onto a network drive before
you can install to a workstation that is connected to a network. See
“Installing the Client onto a Network Drive” on page 7-12.
Ensure that Windows is running on the client and that the client has a
network drive that is connected to the client where you performed a
network installation of the Database Administration product. This
procedure uses N for the network drive. If your network drive is mapped
to another letter, substitute the correct drive letter.
Note
When installing to a workstation, you are limited to those products and
databases that are installed on the network drive. If you require access to
more than what is installed on the network, see your Systems
Administrator.
