BMC Software, Inc., Confidential and Proprietary Information
Installing, Configuring, and Starting Servers (Windows NT) 5-9
Configuring the Server
Your settings are automatically configured during the installation
process. For most installations, you can accept the default settings. These
settings are stored in the Windows NT Registry, and the
patroldb.ini file,
and can be edited through the PATROL DB-Admin Server Manager GUI.
These default settings are listed in Table 5-1, “Configuration File
Defaults (Windows NT Server),” on page 5-10.
For best results, edit these settings only if directed by BMC Software
Technical Support. If you need to change server settings, you can do so
by double-clicking the PATROL DB-Admin Server Manager icon in the
PATROL DB-Admin Server 3.0 program group. Otherwise, skip to
“Starting the Server” on page 5-11.
Note
(Novell Netware only) Disable the logon validation feature of the Job
Scheduler if you use any type of Novell Netware client on the Windows
NT server on which the PATROL Database Administration server is
running. This requirement is due to an incompatibility on the Netware
service provider. Examples of Netware clients are Microsoft Gateway
Services for Netware and Client Services for Netware. To disable the
logon validation, follow these steps:
1. Select the PATROL DB-Admin Server Manager icon from the
PATROL DB-Admin Server 3.0 program group.
2. Click the Options button.
3. From the Server Options tab, clear the Enable Authentication
checkbox and click OK to update the initialization files.
4. Restart the server to activate the changes.
