Filter
Top Products
⎯ 89 ⎯
6 F 2 S 0 8 5 7
/2 Fault record
Clear all fault records?
ENTER=Yes CANCEL=No
• Press the
ENTER
(= Yes) key to clear all the fault records stored in non-volatile memory.
If all fault records have been cleared, the "Latest fault" screen of the digest screens is not
displayed.
4.2.3.2 Displaying Event Records
To display events records, do the following:
• Open the top "MENU" screen by pressing any keys other than the
VIE
W
and
RESET
keys.
• Select 1 (= Record) to display the "Record" sub-menu.
• Select 2 (= Event record) to display the "Event record" screen.
1 =
a
/ 2
R e c o r
i s l D p
2=Clear
v e t
E
n
d
y
• Select 1 (= Display) to display the events with date and time from the top in new-to-old
sequence.
/3 Event record 2/48
16/Oct/1998 23:18:04.294 Tri
p
16/Oct/1998 23:18:03.913
12/Feb/1998 03:51:37.622 Rl
y
.
es
t
Off
Trip
On
cha gne
The lines which are not displayed in the window can be displayed by pressing the
and keys.
To clear all the event records, do the following:
• Open the "Record" sub-menu.
• Select 2 (Event record) to display the "Event record" screen.
• Select 2 (= Clear) to display the following confirmation screen.
/2 Event record
Clear all event records?
ENTER=Yes CANCEL=No
• Press the
ENTER
(= Yes) key to clear all the event records stored in non-volatile memory.
4.2.3.3 Displaying Disturbance Records
Details of the disturbance records can be displayed on the PC screen only (*); the LCD displays
only the recorded date and time for all disturbances stored in the relay. To display them, do the
following:
(*) For the display on the PC screen, refer to RSM100 manual.
• Open the top "MENU" screen by pressing any keys other than the
VIE
W
and
RESET
keys.