Filter
Top Products
⎯ 99 ⎯
6 F 2 S 0 8 5 7
and to turn to the "Setting (change)" sub-menu.
4.2.6.2 Password
For the sake of security of changing the settings and testing the relay, password protection can be
set as follows;
• Press 4 (= Setting (change)) on the main "MENU" screen to display the "Setting (change)"
screen.
/1 Setting
1=Password
(chang )e
2=Description 3=RSM comm
4=Record
7=Binar
y
i
5=Status
6=Protection
n
p
ut 8=Bina
y
rtout
p
u
9=LED
• Press 1 (= Password) to display the "Password" screen.
/2 Password
Input new password [
]
Retype new password [ ]
• Enter a 4-digit number within the brackets after "Input new password" and press the
ENTER
key.
• For confirmation, enter the same 4-digit number in the brackets after "Retype new password"
and press the
ENTER
key.
• Press the
END
key to display the confirmation screen. If the retyped number is different from
that first entered, the following message is displayed on the bottom of the "Password" screen
before returning to the upper screen.
"Mismatch-password unchanged."
Re-entry is then requested.
• Press 2 (= Test) on the "Password" screen to set the password for the test.
/ 2 T e s t
I n p u t n e w p a s s w o r d [
]
R e t y p e n e w p a s s w o r d [ ]
Set the password the same manner as that of the "Setting" above.
Password trap
After the password has been set, the password must be entered in order to enter the setting change
and the test screens.
If 4 (= Setting (change)) is entered on the top "MENU" screen, the password trap screen
"Password" is displayed. If the password is not entered correctly, it is not possible to move to the
"Setting (change)" sub-menu screens.
Password
Input password [
]