Toshiba GRT100 Personal Lift User Manual


 
189
6 F 2 S 0 8 5 7
/2 Status
1=Metering
2=Time Synchronization
3=Time zone
/3 Time synchronization
0=Off 1=IRIG 2=RSM 3=IEC 4=SNTP
Current No.=0 Select No. = _
/3 Time zone 1/ 2
GMT ( -12- +12): +9 _ hrs
GMTm ( -59- +59): +0 min
/3 Metering 1/ 1
Display value 1=Primary 2=Secondary 1_
a-1
/2 Password
Input new password [ _ ]
Retype new password [ ]
/2 Description
1=Plant name 2=Description
/2 Communication
1=Address/Parameter
2=Switch
/1 Setting(change)
1=Password 2=Description 3=Comm.
4=Record 5=Status 6=Protection
7=Binary input 8=Binary output 9=LED
/2 Record
1=Fault record 2=Event record
2=Disturbance record
/3 Event record 1/129
BITRN( 0- 128): 128 _
EV1 ( 0- 3071): 0
EV2 ( 0- 3071): 1
/3 Disturbance record
1=Record time & starter
2=Scheme switch
3=Binary signal
/4 Record time & starter 1/ 7
Time ( 0.1- 3.0): 2.0 _ s
1OCPS( 0.10- 20.00): 0.10 pu
2OCPS( 0.10- 20.00): 0.10 pu
/4 Scheme switch 1/16
TRIP1 0=Off 1=On 1 _
TRIP2 0=Off 1=On 1
TRIP3 0=Off 1=On 1
: Confirmation trap
: Password trap
Password
Input password [_ ]
/2 *************
Change settings?
ENTER=Yes CANCEL=No
/3 Plant name [ _ ]
ABCDEFGHIJKLMNOPQRSTUVWXYZ()[]@_
abcdefghijklmnopqrstuvwxyz{}*/+-<=>
0123456789!”#$%&’:;,.^
/3 Description [ _ ]
ABCDEFGHIJKLMNOPQRSTUVWXYZ()[]@_
abcdefghijklmnopqrstuvwxyz{}*/+-<=>
0123456789!”#$%&’:;,.^
a-1 b-2
/3 Fault record 1/1
Phase mode 1=Operating 2=Fault 1 _
/3 Address/Parameter 1/***
HDLC ( 1- 32): 1 _
IEC ( 0- 254): 2
SYADJ( -9999- 9999): 0 ms
/3 Switch 1/***
PRTCL1 1=HDLC 2=1EC103 2 _
232C 1=9.6 2=19.2 3=38.4 4=57.6 4
IECBR 1=9.6 2=19.2 2
/4 Binary signal 1/32
SIG1 ( 0- 3071): 1 _
SIG2 ( 0- 3071): 2
SIG3 ( 0- 3071): 3