Filter
Top Products
⎯ 87 ⎯
6 F 2 S 0 8 5 7
/ 6 V T & T C r a t i o 1 / 7
1 C T
(
1-20O0
)
0 :2000
)2 C T ( 1 - :20O00 1000
)
3 C T ( 1 -
:20O00
400
1 n C T
( 1 - 2 0 O 0 )0: 100
2 n C T
( )1- :20O00 100
3 n C T
(
1- 20O0 )0:
100
V T
(
)1- :20O00
400
To move to the lower screen or move from the left-side screen to the right-side screen in Appendix
E, select the appropriate number on the screen. To return to the higher screen or move from the
right-side screen to the left-side screen, press the
END
key.
The
CANCEL
key can also be used to return to the higher screen but it must be used carefully
because it may cancel entries made so far.
To move between screens of the same hierarchical depth, first return to the higher screen and then
move to the lower screen.
4.2.3 Displaying Records
The sub-menu of "Record" is used to display fault records, event records and disturbance records.
4.2.3.1 Displaying Fault Records
To display fault records, do the following:
• Open the top "MENU" screen by pressing any keys other than the
VIEW
and
RESET
keys.
• Select 1 (= Record) to display the "Record" sub-menu.
R e c o
1 = r e c o r d
3 = D i s t u r b a n c e
/ 1
r
a u
t
F
l
2=Event
reco r d
record
d
• Select 1 (= Fault record) to display the "Fault record" screen.
1 =
a
/ 2
R e c o r
i s l D p
2=Clear
a u t
F
l
y
d
• Select 1 (= Display) to display the dates and times of fault records stored in the relay from the
top in new-to-old sequence.
/ 3 F a u l t r e c o r d 1 / 4
#
1 1 6 / O c t / 1 9 9 7 1 8 : 1 3 : 5 7 . 0 3 1
# 2 2 0 / S e p /1997 15:29:22.463
# 3 0 4 / J u l /1997 11:54:53.977
• Move the cursor to the fault record line to be displayed using the and keys and press the
ENTER
key to display the details of the fault record.