Filter
Top Products
⎯ 84 ⎯
6 F 2 S 0 8 5 7
1) When configurable LEDs (LED1 through LED4) are assigned to latch signals by issuing an
alarm, press the
RESET
key more than 3s until all LEDs reset except "IN SERVICE" LED.
2) When configurable LED is still lit by pressing
RESET
key in short period, press
RESET
key
again to reset remained LED in the above manner.
3) LED1 through LED4 will remain lit in case the assigned signals are still active state.
While any of the menu screens is displayed, the
VIEW
and
RESET
keys do not function. To
return to the digest "Auto-supervision" screen, do the following:
• Return to the top screen of the menu by repeatedly pressing the
END
key.
• Press the
END
key to turn off the LCD.
• Press the
VIEW
key to display the digest screen.
• Press the
RESET
key to turn off the LCD.
4.2.2 Relay Menu
Figure 4.2.1 shows the menu hierarchy in the GRT100. The main menu has five sub-menus,
"Record", "Status", "Setting (view)", "Setting (change)", and "Test". For details of the menu
hierarchy, see Appendix E.