Filter
Top Products
OfficeServ 7100 Call Server Programming Guide
Samsung Business Communications 2-11
[105] STATION SPEED DIAL
Allows the system administrator or technician to assign phone numbers to a station’s per-
sonal speed dial locations.
CONDITIONS
Each station may have up to 50 locations(or bins) assigned to it in MMC 606(Assign Speed
Block). The speed dial bins are numbered 00~49. Each assigned phone number consists of
a trunk or trunk group access code followed by a separator and up to 24 digits to be dial.
These dial digits may consist of 0~9, * and #. If the system recognizes a valid trunk or
trunk group access number, it will automatically insert the separator.
DEFAULT DATA
NONE
PROGRAM BUTTONS
B Used to insert a flash code ‘F’
C Used to insert a pause code ‘P’
D Used to insert a pulse/tone conversion code ‘C’
E Used to mask/unmask following digits(shows as ‘[’or ‘]’)
F Used to enter name for speed dial bin(see MMC 106)
ACTION DISPLAY
1) Press Transfer button and enter 105.
Display shows:
[201] SPEED DIAL
00:
2) Dial station number.(e.g., 205)
OR
[205] SPEED DIAL
00:
Press Volume button to select station and
press Right Soft button to move cursor.
If selected station has no speed dial bins,
the display will be as shown and a new station
[205] SPEED DIAL
SPDBLK NOT EXIST
may be selected.
3) Dial location number.(e.g., 05)
OR
[205] SPEED DIAL
05:_
Press Volume button to select location and
press Right Soft button to move cursor.