Filter
Top Products
CHAPTER 2. Ошибка! Стиль не определен.
2-158
Samsung Business Communications
[508] CALL COST
Set the Call Cost attributes generated by the system during a call. This information can be
displayed on the phone during a call or as an SMDR record.
No Display Description
0 UNIT COST PER MP When the system is installed to receive metering pulses
on a C. O. outgoing call. It is used for generating total call
cost by multiplying it by the number of pulses. Allows a
maximum value of 9999.(Currency is PENCE or ECENTS
depending on USE EURO option setting in MMC 210.)
1 CALL COST RATE This generates additional call cost calculated by multiply-
ing this rate by the original call cost. Ranges from 100 to
255.
CALL COST
Changing this value when there is a call in progress may result in an inaccurate
call cost. This MPD facility requires the Meter Pulse Detection version of the trunk
card.
DEFAULT DATA
UNIT COST PER MP: 0200 PENCE, CALL COST RATE: 100 PERCENT
ACTION DISPLAY
1) Press Transfer button and enter 508.
Display shows:
UNIT COST PER MP
0200 PENCE ™
2) Dial 0 or 1.
OR
CALL COST RATE
100 % ™
Press Volume button to select and press Right Soft
button to move cursor.
3) Enter new value.(e.g., 110)
System returns to step 2.
CALL COST RATE
110 % ™
4) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 110 STATION ON/OFF(CALL COST OPTION)