Filter
Top Products
CHAPTER 2. Ошибка! Стиль не определен.
2-308
Samsung Business Communications
(continued)
No Parameter Description Default
13 DTMF TYPE There are two types of DTMF transmission: INBAND,
which is industry standard(H.245) type DTMF transport,
and OUTBAND which is a Samsung proprietary
method.
OUTBAND
14 TOS FIELD An 8-bit binary value that will be used by external
routers, switches, etc,(that optionally support TOS-bit
prioritization) to identify the transport-priority value of
data packets generated by the MGI card. This value can
be left at the default value(00000) if your network infra-
structure does not support this method of bandwidth
management.
All bits 0
15 FAX RETRY This option selects retry count of Fax-over-IP if errors
are detected. The range is 0~4(0 means no retry).
3
16 RTP CHK TM This option selects the interval time for sending RTCP. 5 SEC
17 USE T38 711 If use T38 FAX, specifies 711 Codec use Enable
18 802.1 VLAN Set value (0000~4095) 0000
19 802.1 PRIOR Set value (0~7) 0
20 802.1Q Enable or disable for 802.1Q
(including 802.1 VLAN and 802.1 PRIOR)
DISABLE
21 EC GAIN Set EC gain value (18~38) 32
22 NLP Set NLP value (0~2) 0
23 EC TAIL LEN Set EC TAIL LEN (8~128) 064 MS
24 JIT PEROID Set JITTER PERIOD (1~10) 01
25 JIT DEL TM Set JITTER DELETE TIME (0~500) 250
DEFAULT DATA
SEE DESCRIPTION
ACTION DISPLAY
1) Press Transfer button and enter 835.
Display shows the first option.
MGI3:CODEC-FRAME
G.729A –40 MS
2) Enter MGI type(0-2) via dial keypad.
OR
MGI3:CODEC-FRAME
G.729A –40 MS
Press Volume button to make selection and
press Right Soft button to move cursor.
3) Enter MGI DSP parameter via dial keypad.
OR
MGI3:CODEC-FRAME
G.729A –40 MS