Filter
Top Products
CHAPTER 2. Ошибка! Стиль не определен.
2-284
Samsung Business Communications
[820] ASSIGN SYSTEM LINK ID
This MMC is used to assign the system link ID for PRI and VoIP networking. Up to 100
link IDs can be entered including SELF ID. In addition, each Link ID is associated with the
IP address and IP address type of the MCP card for that system.
Option Description
LINK ID System ID for networking feature.
SIGNAL G/W System IP address for VoIP networking.
IP TYPE System IP address type for VoIP networking. SELF system IP address type
determines ‘SYSTEM IP TYPE’ in MMC 830.
CONDITIONS
‘SELF’ represents self-node, and must be set to use the networking function. Items other
than ‘SELF’ are used for station numbers and can be omitted.
DEFAULT DATA
NONE
ACTION DISPLAY
1) Press Transfer button and enter 820.
Display shows:
SELF :LINK ID
2) Enter SELF link ID via dial keypad and
press Right Soft button.
SELF :LINK ID
11
3) Press Volume button to select other link ID
and press Right Soft button to mover cursor.
SYS01:LINK ID
4) Enter other link ID via dial keypad and
press Right Soft button.
SYS01:LINK ID
22
5) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 821 ASSIGN NETWORK TRUNK
MMC 823 ASSIGN NETWORK COS
MMC 824 NETWORK DIAL TRANSLATION
MMC 830 ETHERNET PARAMETERS