Filter
Top Products
CHAPTER 2. Ошибка! Стиль не определен.
2-244
Samsung Business Communications
[747] RATE CALCULATION TABLE
The RATE CALCULATION TABLE is used to define the billing charges for each COST
RATE. These rate tables correlate with the Trunk Cost Rate and the Costing Dial Plan.
There are eight call costing rates. Each rate has the following data fields.
No Type Description
0 1ST DUR
(FIRST INTERVAL
DURATION)
This is the amount of time at the beginning of each call to which a
fixed cost is applied.
The range is 0-999 seconds; e,g. 180 seconds(three minutes).
1 1ST COST
(FIRST INTERVAL
COST)
This is the cost for the first interval duration in £s sterling or Euros.
The range is 0 to 999; e.g., 345(£3.45 or €3.45).
2 2ND DUR
(SECOND INTER-
VAL DURATION)
This is the duration of each billing increment after the first interval
has expired.
The range is 0-999 seconds; e.g., 006 seconds(six seconds).
3 2ND COST
(SECOND INTER-
VAL COST )
This is the cost for each billing increment, in £s sterling or Euros,
after the first interval has expired.
The range is 0-999; e.g., 100(£1.00 or €1.00).
4 SURCHARGE
This is a one-time charge, in £s sterling or Euros, that is applied to
the call over and above the time charges.
The range is 0-999; e.g.,150(£1.50 or €1.50).
Currency values(£ or €)
Currency values(£ or €) depend on the setting for the USE EURO option
in MMC 210.
DEFAULT DATA
ALL COST RATES: NO DATA
ACTION DISPLAY
1) Press Transfer button and enter 747.
Display shows:
COST RATE (1)
1ST DUR :000 SEC
2) Dial COST RATE number 1-8.(e.g., 3)
OR
COST RATE (3)
1ST DUR :000 SEC
Press Volume button to select COST RATE and
press Right Soft button to move cursor.