Filter
Top Products
CHAPTER 2. Ошибка! Стиль не определен.
2-236
Samsung Business Communications
[725] SMDR OPTIONS
Allows the system administrator to select the information printed on the SMDR report.
The following options may be selected:
No Option Default Description
00 PAGE HEADER YES This option determines whether a page header will print
at the top of each page. This would normally be turned
off if SMDR is being sent to a Call Accounting machine.
01 LINE PER PAGE 66 This option selects the length of each page to determine
when to print the SMDR header. The number of lines is
in the range 01-99.
02 INCOMING CALL YES This option determines whether incoming calls will print
on SMDR.
03 OUTGOING CALL YES This option determines whether outgoing calls will print
on SMDR.
04 AUTHORIZE
CODE
NO This option determines whether authorization codes will
print on SMDR. If this option is set to NO, ‘****’ is
printed on SMDR.
05 SMDR START
TIME
YES This option determines whether valid calls will include
the minimum call time in total call duration.
06 IN/OUT GROUP NO This option allows a message, IN GROUP or OUT
GROUP, to be printed in the ‘digits dialled’ column each
time a station enters or leaves a group.
07 DND CALL NO This option allows a message, IN DND or OUT DND, to
be printed in the ‘digits dialled’ column each time a sta-
tion enters or leaves DND.
08 WAKE-UP CALL YES This option determines whether stations receiving an
alarm reminder call will print on SMDR.
09 DIRECTORY
NAME
NONE This option allows the system administrator to enter a
name up to 16 characters which will appear on the
SMDR header.
10 CALLER ID DATA NO This option can be selected to print Caller ID data re-
ceived from the Central Office on incoming calls.
This option requires the use of a 132-column wide carriage
printer or an 80-column printer set for condensed print.
11 ABANDON CALL NO If this option is set to YES, unanswered calls for which
CID information was received will print on SMDR.
13 NO. OF DIAL
MASK
0 If this option is set to a numeric value, the selected last
digits of the number dialled field will be masked as as-
terisks(*) on the SMDR print out. Maximum masked
digits is 18. First 4 digits will not mask.