Filter
Top Products
CHAPTER 2. Ошибка! Стиль не определен.
2-318
Samsung Business Communications
[840] IP PHONE INFORMATION
This MMC provides a means to register IP phones with the OfficeServ 7100 system. Dur-
ing registration, the IP and MAC addresses are also registered. The User ID and Password
must match the table entry in this MMC for the IP phone to be registered. The system de-
fault phone numbers are 3201~3299 and default User IDs match the default station num-
bers. The system default password is 1234. IP phones must be individually programmed
with a User ID and Password in order to register with the system.
No Option Description Default
00 USER ID This is the ID the IP phone must match to register
with the OfficeServ 7100 system.(alphanumeric)
First 99 IP phones
are 3201~3299,
others are EMPTY.
01 USER PSWD This is the password the IP phone must have to reg-
ister with the OfficeServ 7100 system.
(alphanumeric)
‘1234’
02 IP ADDR This is the IP address of the IP phone when regis-
tered with the system.(Read only)
0.0.0.0.
03 MAC ADDR This is MAC address of the IP phone when regis-
tered with the system.(Read only)
FFFFFFFFFFFF
04 SIG PORT This is the IP UDP port of the IP phone when regis-
tered with the system.(Read only) This information
will be needed when traversing NAT routers, fire-
walls, etc.
6000
05 VOICE PORT This is the IP RTP port of the IP phone when regis-
tered with the system.(Read only) This information
will be needed when traversing NAT routers, fire-
walls, etc.
9000
06 IP TYPE This is the type of IP network used: PRIVATE or
PUBLIC.
PRIVATE
07 DSP TYPE This selects which CODEC this phone’s DSP will use.
G.729A(low bandwidth) or G.711(high bandwidth).
This data uses IP phone to IP phone connection
only; others follow MGI CODEC type.
G.729A
08 PHONE TYPE This is the type of IP phone used, SAMSUNG or SIP
(future). Use SAMSUNG.
SAMSUNG
09 REGIST CLR This is used to clear the registration of a particular
IP phone. This is similar to unplugging and plugging
in the phone and is useful for maintenance.
NO
10 FRAME
COUNT
This value determines the transmission interval time
of VoIP packets generated by the IP phone. This
data uses MMC 841 ITP DSP PARA DOWN =
PHONE DATA only. The range is 10~40 ms.
20 ms