Filter
Top Products
OfficeServ 7100 Call Server Programming Guide
Samsung Business Communications 2-205
[709] TOLL PASS CODE/SPECIAL CODE TABLE
This MMC provides a means to program trunk code tables as described below.
No Special Code Description
0 PBX CODE This table contains up to five entries and is used to identify the
trunk access codes needed for toll restriction when the system
is used with either a PBX or a CENTREX-supplied dial tone. Toll
restriction will only be applied on trunks flagged as PBX in MMC
401 if a trunk access code entered in this table is dialled. Toll
restriction will be applied to the digits following the trunk access
code.
1 SPECIAL CODE This table identifies the special feature codes used to activate
central office custom-calling features such as CID Block and
Call Waiting Disable. The special feature codes can be used on
a per-call basis without affecting LCR or toll restriction pro-
gramming. There is a maximum of 10 entries available, each of
which may be up to four digits long.
2 TOLL OVERRIDE This table of eight entries is used to identify the numbers that
will bypass all dialling restrictions. This bypass includes toll re-
striction, trunk access and forced authorization or account
codes. Each entry in the table can be up to 14 digits long.
3 OVRD USE TRK GRP This entry designates the trunk group that toll override calls will
access.
DEFAULT DATA
NONE
ACTION DISPLAY
1) Press Transfer button and enter 709.
Display shows:
PBX ACCESS CODE
1:
2) Select PBX, SPECIAL CODE, TOLL OVERRIDE
or OVRD USE TRK GRP.
TOLL OVERRIDE
1:
OR
Press Volume button to make selection and
press Right Soft button to move cursor.
3) Enter index number.(e.g., 3)
OR
TOLL OVERRIDE
3:_
Press Volume button to make selection and
press Right Soft button to move cursor.