Filter
Top Products
CHAPTER 2. Ошибка! Стиль не определен.
2-266
Samsung Business Communications
[800] ENABLE TECHNICIAN PROGRAM
Used to open and close technician-level programming. If programming is not opened and
an attempt is made to access a system MMC, an error message will be displayed.
CONDITIONS
A 4-digit passcode is required to access this MMC. Each character can be digits 0-9. When
opened, this MMC enables access to all MMCs.
DEFAULT DATA
DISABLE
ACTION DISPLAY
1) Press Transfer button and enter 800.
Display shows:
ENABLE TECH.PROG
PASSCODE:
2) Enter passcode.
ENABLE TECH.PROG
PASSCODE:∗∗∗∗
Correct code shows: ENABLE TECH.PROG
DISABLE TENANT:1
Incorrect code shows:
ENABLE TECH. PROG
PASSCODE ERROR
3) Enter 1 to enable or 0 to disable.
OR
ENABLE TECH.PROG
ENABLE TENANT:1
Press Volume button to select and press
Right Soft button to move tenant number and
enter tenant number(1-2).
4) Press Speaker button to advance to MMC entry level. 801:TEC.PASSCODE
SELECT PROG.ID
5) Enter the MMC required to begin programming.
6) To log out and return to MMC 800, press
Volume button to select DISABLE.
OR
Press Speaker button then Transfer to return to
normal display.
Programming option will time out.
RELATED ITEMS
MMC 801 CHANGE TECHNICIAN PASSCODE