Filter
Top Products
CHAPTER 2. Ошибка! Стиль не определен.
2-328
Samsung Business Communications
5) Set the items below at the WBS24 menu. The se-
lected WBS is as set in MMC 849(SELECT AP
TYPE option) i.e. CWBS=COMBO WBS,
BWBS=BASIC WBS.
Register the WBS24 IP ADDRESS. CWBS1: IP ADDR
0. 0. 0. 0
Register the WBS24 NET MASK. CWBS1: NET MASK
255.255.255. 0
Register the WBS24 GATEWAY. CWBS1: GATEWAY
0. 0. 0. 0
Displays the WBS24 MAC ADDRESS. CWBS1 : MAC ADDR
FFFF FFFF FFFF
Displays the WBS24 VERSION. CWBS1 : VERSION
Displays the WBS24 STATUS. CWBS1 : STATUS
OFF
Register the WBS24 RF CHANNEL.(The WBS RF
channel must be selected from the pre-assigned
CWBS1 : RF CHAN
USE CH 1:01
RF channels in WLAN RF CHANNELS).
Register the WBS24 TX POWER.
(Default: LEVEL 1~4)
CWBS1 : TX POWER
DEFAULT
Used to clear the WBS parameter. CWBS1 : PARA CLR
ARE YOU SURE?NO
6) Set the items below at the menu.
Register the RE-TRANS T1.
The initial re-transmission time if no answer,
SIP : RE-TRANS T1
000500MS
based on the RFC2543 specification.
The range is 0-9900 ms.(Default: 500 ms)
Register the RE-TRANS T2.
The maximum re-transmission time if no answer,
SIP : RE-TRANS T2
004000MS
based on the RFC2543 specification.
The range is 0-9900 ms.(Default: 4000 ms)