Filter
Top Products
OfficeServ 7100 Call Server Programming Guide
Samsung Business Communications 2-145
(continued)
Timer Name Default Range Unit Description
TRANSFER RECALL 20 0-250 SEC This timer determines how long transferred
calls ring before recalling. This is a system-
wide timer.
TRK AUTOMOH DISC
60 1-250 SEC When set to ON, incoming trunk calls are
connected to MOH automatically after the
DISA ANSWR timer(MMC 503) expires. In
this case the caller hears MOH. If the TRK
AUTOMOH DISC timer expires before the
call is answered, the call is disconnected.
TSW CONN. DELAY 0 0-10 SEC When an incoming trunk makes an outgoing
call to another trunk, the system connects the
voice path after this time.
UCDS AUDIO ALARM 0 0-990 SEC When an SVMi-20 card is installed and the digital
UCD package enabled, this counter determines
the maximum number of seconds a call has
been waiting at the UCD group before the UCD
group’s SUPV key begins to flash along with an
audio alarm. For more UCD alarm conditions,
see MMC 500.
UCDS VISUAL ALARM 0 0-250 SEC When an SVMi-20 card is installed and the
digital UCD package enabled, this counter
determines the maximum number of seconds
a call at the UCD group before the UCD
group’s SUPV key begins to flash as an
alarm. For more UCD alarm conditions, see
MMC 500.
VOIP RE-ROUTE TM 15 0-25 SEC If an outgoing call made via a VoIP trunk
does not receive an acknowledgement mes-
sage from the called party within this time,
the call is treated as failed.
When timers value is ‘0’
Some timers are disabled when their value is set to ‘0’.
DEFAULT DATA
SEE DESCRIPTION
SOME TIMERS DEPEND ON COUNTRY