Filter
Top Products
OfficeServ 7100 Call Server Programming Guide
Samsung Business Communications 2-123
CONDITIONS
y Before setting the PRI program, the J2 jumper of the TEPRI or TEPRI2 card must be
set to ‘ON’ for PRI mode.
y After changing this program, run MMC 418, BRI AND PRI CARD RESTART, to ap-
ply the new setting.
DEFAULT DATA
CHANNEL ANY: YES
PRI MODE: DDI
DLSEND: OVERLAP
CLIP TABLE: NONE
NB TYPE: NATIONAL
NB PLAN: ISDN
ACTION DISPLAY
1) Press Transfer button and enter 420.
Display shows:
[701] PRI OPTION
CHANNEL ANY:YES
2) Dial first PRI trunk number in PRI card.(e.g., 730)
OR
[730] PRI OPTION
CHANNEL ANY:YES
Press Volume button to make selection and
press Right Soft button.
3) Enter option number.
OR
[730] PRI OPTION
PRI MODE:DDI
Press Volume button to select option.
4) Press Volume button to make selection.
Then press Right Soft button.
[730] PRI OPTION
PRI MODE:NORMAL
5) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 323 CALLING PARTY NUMBER
MMC 405 TRUNK CO TEL NUMBER
MMC 418 BRI & PRI CARD RESTART
MMC 714 DID NAME AND NUMBER TRANSLATION