Filter
Top Products
CHAPTER 2. Ошибка! Стиль не определен.
2-264
Samsung Business Communications
[763] SECOND LCR
This MMC allows the technician to input the Extended LCR information table.
Max table index is 200. This table have translation and route information for input digits.
The last table(index 200) has only ‘NEXT ROUTE’ option. This is used for the case there
are no matching table for user input digits. NEXT ROUTE option can be set by LCR or
trunk group as follows.
Option Description Default
IN DIGIT Define user input digits after E-LCR code
(Max 16 digits)
-
OUT DIGIT Outgoing digits(these digits will be sent instead of input digits) (Max
16 digits)
-
USE LCR NUM Select which E-LCR code(E-LCR1, E-LCR2, E-LCR3, E-LCR4)
used for this table index.
ALL
NEXT ROUTE Select ‘LCR’ or trunk group to seizure.
‘LCR’ means that MMC710 LCR DIGIT table will be used with out-
going digits(OUT DIGIT).
LCR
CONDITIONS
MMC724 FEATURE CODE: E-LCR1, E-LCR2, E-LCR3, E-LCR4 addition
DEFAULT DATA
SEE DESCRIPTION
ACTION DISPLAY
1) Press Transfer button and enter 763.
Display shows:
(001)IN DIGIT
2) Dial Table number 001-200.
OR
(001)IN DIGIT
Press Volume button to select Table number and
press Right Soft button to move cursor.
3) Enter IN DIGIT maximum 16 digits, and press
Right Soft button to move cursor.
(001)IN DIGIT
1234
4) Enter OUT DIGIT option number([1]).
OR
(001)OUT DIGIT
Press Volume button to select OUT DIGIT and press
Right Soft button to move cursor.