Filter
Top Products
OfficeServ 7100 Call Server Programming Guide
Samsung Business Communications 2-319
(continued)
No Option Description Default
11 JITTER BUF Decides the minimum time to consider delay for jitter
adjustment. This data uses MMC 841 ITP DSP
PARA DOWN = PHONE DATA only. The range is
10~90 ms.
20 m
12 TOS FIELD An 8-bit binary value that will be used by external
routers, switches, etc,(that optionally support TOS-
bit prioritization) to identify the transport-priority
value of data packets generated by the IP phone.
This value can be left at the default value(00000) if
your network infrastructure does not support this
method of bandwidth management. This data uses
MMC 841 ITP DSP PARA DOWN = PHONE DATA
only.
All bits 0
13 S/W VERSION Display IP phone software version.(Read only) -
14 S/W UPGRADE This is used as IP phone software upgrade request
command. When YES is selected and Right Soft
button is pressed, the system requests IP phone
software upgrade with TFTP IP address.
-
15 TIME ZONE Allows remote IP phones to display own time zone. 00.00
16 PUBLIC TO
PUBLIC
When this option is set to USE MGI, the MGI can be
allocated between remote IPs in the same private
zone.
NOT USE MGI
17 SIG TYPE This option can change UDP/TCP signal type for
IPs.(ITP V3.xx only supports the TCP signal type. If
TCP is set and ITP V2.xx attempts to connect, the
TCP signal type will change from TCP to UDP
automatically.)
UDP
18 PRIVATE IP Displays private IP address of remote IP phone allo-
cated by phone’s router.
-
19 VIDEO DSP This option is codec value o f Video IP phone
(0 : MPEG4, 1 : H.263)
H.263
20 VIDEO SIZE This option is for video size
(0 : CIF, 2 : QCIF)
CIF
DEFAULT DATA
SEE DESCRIPTION