Filter
Top Products
OfficeServ 7100 Call Server Programming Guide
Samsung Business Communications 2-143
(continued)
Timer Name Default Range Unit Description
FIRST DIGIT TIME 10 1-250 SEC This timer controls how long the system will
wait for dialling to begin before dropping the
dial tone and returning the you to error tone.
HOK FLASH MAX TM 120 20-2500
MSEC
This timer monitors the duration of a hook-
switch flash to ensure that the flash is valid
and not a line noise or an accidental hook-
switch bounce LONGEST duration.
HOK FLASH MIN TM 80 20-2500
MSEC
This timer monitors the duration of a hook-
switch flash to ensure that the flash is valid
and not a line noise or an accidental hook-
switch bounce SHORTEST duration.
HOOK OFF TIME 100 20-2500
MSEC
This timer controls the time before dial tone is
sent to a single line station.
HOOK ON TIME 200 20-2500
MSEC
This timer sets the minimum amount of time that
the system will recognize as an SLT hang up.
INQUIRY RELEASE 30 1-250 SEC This timer monitors the duration of the interac-
tion of the Soft button to determine when to
return the LCD back to a normal status. This
timer affects only display phones.
INTER DIGIT TIME 10 1-250 SEC This timer controls the grace period between
dialling valid digits before dropping the call
and returning you back to error tone.
ISDN INT DGT TM 7 1-15 SEC This timer controls the grace period between
dialling valid digits and the end of the dialling
string on an ISDN call.
KMMC LOCK OUT TM 30 10-50 SEC This timer controls the grace period between
programming actions while in a programming
session. The timer automatically returns the sys-
tem to secure programming status.
LCR ADVANCE TIME 5 1-250 SEC This timer controls the time before selecting
the next allowable route when a station is
allowed to route advance.
LCR INTER DIGIT 5 1-250 SEC This timer controls the grace period between
dialling valid digits before accessing a trunk.
LONG KEY DETECT 600 0-2500
MSEC
This timer controls the time a key must be held
down before the key press is repeated.
LONG KEY REPEAT 300 0-2500
MSEC
This timer controls the time between repeated
digits on a long key press.
MCL DELAY TIME 4 0-9 SEC This timer controls the time when the system
should start transmitting Authorisation Code
after sending MCL access code(Cable& Wire-
less 131 access). Available in UK only.