Filter
Top Products
CHAPTER 2. Ошибка! Стиль не определен.
2-326
Samsung Business Communications
(continued)
No Parameter Description Default
07 VERSION WLAN module version. Version
20 MAX AP CH. Set the maximum channel number of AP 00
21 WLAN SWTCH Support WLAN switch function DISABLE
SIP PARAMETER
No Parameter Description Default(ms)
0 RE-TRANS T1 When using an unreliable transmission protocol such
as UDP, retransmission is required when no reply is
received. RE-TRANS.T1 TIME is the initial retrans-
mission interval defined in RFC2543.
500
1 RE-TRANS T2 Maximum retransmission interval defined in RFC
2543
4000
2 RE-TRANS T4 RFC 2543 defines this parameter for various pur-
poses. For example, this parameter can be used as
the time waited by User Agent Server after receiving
ACK message in an unreliable transmission proto-
col.
5000
3 GEN RING TM When using an unreliable transmission protocol, the
server cannot be sure if the client has received the
last reply. Thus, the server must retransmit the reply
for this length of time until it receives the requested
retransmission. For example, this parameter can be
used as the waiting time after sending 200 OK for
INFO.
6000
4 INV RING TM When using an unreliable transmission protocol, the
client cannot verify if the server has received the
ACK returned to the server for the INVITE Final Re-
sponse. The client waits for this length of time after
sending the ACK for the Final Response.
1000
5 GEN NO RESP Waiting time before cancelling SIP related Request. 5000
6 INV NO RESP Waiting time before cancelling SIP INVITE Request. 6000
7 REQ
RETRY
Waiting time for receiving final response for SIP re-
lated Request.
5000
8 PROVISIONAL On receiving Provision Response, the User Agent
must wait for this length of time until Timeout.
180000
DEFAULT DATA
SEE DESCRIPTION