Filter
Top Products
OfficeServ 7100 Call Server Programming Guide
Samsung Business Communications 2-341
(continued)
No Code Alarm Name Definition
-
MJD-- DTRK Error ISDN or E1 card Fault
50 MJD18 E1 Restart The E1 card has restarted.
Alarm Data = Cabinet, Slot(Cx-Syy)
51 MJD19 PRI Restart The PRI card has restarted.
Alarm Data = Cabinet, Slot(Cx-Syy)
52 MJD20 BRI Restart The BRI card has restarted.
Alarm Data = Cabinet, Slot(Cx-Syy)
53 MJD21 PCM Loss Loss of PCM coding on a digital facility.
Alarm Data = Cabinet, Slot(Cx-Syy)
54 MJD22 PCM Recovery Loss of PCM coding on a digital facility.
Alarm Data = Cabinet, Slot(Cx-Syy)
- MJE-- MGI Error MGI card Fault
55 MJE01 MGI Restart The MGI card has restarted.
Alarm Data = Cabinet, Slot(Cx-Syy)
56 MJE02 MGI Stop The MGI card has stoped.
Alarm Data = Cabinet, Slot(Cx-Syy)
57 MJE03 MGI IP Duplicate The MGI card IP address is duplicated.
Alarm Data = Cabinet, Slot(Cx-Syy)
58 MJE04 MGI NTWK Error The MGI card has blocked because the system detects
the card doesn’t respond via network link.
External ping test.
Alarm Data = Cabinet, Slot(Cx-Syy)
59 MJE05 MGI NTWK Rec The MGI card has restarted because the system detects
the card does respond via network link.
External ping test.
Alarm Data = Cabinet, Slot(Cx-Syy)
60 MJE06 MGI DSP Error The MGI card DSP has blocked because the system
detects the card DSP does not run correctly.
Alarm Data = Cabinet, Slot(Cx-Syy-Pzz)
61 MJE07 MGI DSP Run The MGI card DSP has restarted because the system
detects the card DSP runs correctly.
Alarm Data = Cabinet, Slot(Cx-Syy-Pzz)
62 MJE08 WBS Disconnect Indicates the WBS is disconnected.
Alarm Data = CWBS:xx or BWBS:xx
63 MJE09 WBS connect Indicates the WBS is connected.
Alarm Data = CWBS:xx or BWBS:xx