Filter
Top Products
CHAPTER 2. Ошибка! Стиль не определен.
2-62
Samsung Business Communications
[217] TRAFFIC REPORT OPTION
This MMC is used to print a traffic report and select options. The traffic report can be
printed on demand, or every hour, or at a programmed time each day, or for up to three
separately-timed shifts. Automatic printing will always clear the totals.
When report MANUAL PRINT OUT is selected, the options are:
No Option Description
0 PRINT AND CLEAR A report is printed and all totals are reset to 0.
1 PRINTOUT ONLY A report is printed and all the totals are saved.
2 CANCEL PRINTOUT Cancels printout.
When AUTO PRINT OPTN is selected, the options are:
No Option Description
0 AUTO PRINT OFF Automatic print feature is disabled.
1 DAILY A report is printed at a programmable time every day and all the
totals are reset to ‘0’.
2 EVERY HOUR A report will be printed every hour.
3 THREE TIME SHIFT Up to three separate Start and End times may be programmed to
report traffic within different shifts. A report is printed at the end of
each End time and all totals are reset to ‘0’.
When a report is printed, the totals represent call statistics accumulated from the date of the
last report stated as BEGINNING: D & T up to the date of this printout stated as ENDING
D & T.
If there are no trunks in a group, the trunk group report for that group will not print.
CONDITIONS
If this function is required in an OfficeServ 7100 system with an MCP card, you must con-
nect the LAN cable to the MCP card and be connected to a terminal supporting the TCP/IP
function.
DEFAULT DATA
AUTO PRINT OFF